👉OEM Part Number

1411

👉Description

The 1411 carburetor is designed and calibrated for optimum marine performance or high power automotive engines.It is an electronically controlled throttle with 4-cylinder square bore carburetor flange, single inlet with air valve assist.
1410-750 cfm Carburetor is precision cast to meet or exceed OEM specifications, precision CNC machined from high quality aluminum alloy, silver polished exterior, no blown power valves or broken plastic parts, hard wearing and durable, base bolt type is 3 / 4 x 2 inch.
The carburetor automatically proportions the appropriate concentration and outputs the appropriate amount of mixture according to the requirements of the different engine conditions, so that the mixture is well blended and provides power to start and run your machine.

👉Application

Replacement for Edelbrock 750CFM carburetor.

👉Features
-Electric choke
-Smooth throttle response throughout the power band
-Lightweight all-aluminum body is compatible with gasohol and blended fuels
-Includes both timed and full vacuum ports for ignition advance
-Two-piece design means no gaskets below the fuel level for leak-free operation
-Float levels are factory set; adjustments are rarely needed

👉Precautions for installing the carburetor

1.Before installation, the fuel tank should be cleaned, as impurities such as gum, moisture, and rust tend to accumulate inside the tank. These impurities may block the oil pump filter screen and affect the normal supply of fuel.

2. Due to long-term transportation, the position of the oil float may change. Because this material is copper, you can adjust the oil level by checking the window.

3. If you find oil leakage in our carburetor, you can clean it. We have tested all of our carburetors and found that they contain oil. If left for a long time, some chemical reactions may occur. Cleaning can improve this issue.

4. Idle speed problem: check whether the idle speed screw is fully retracted. If it is fully retracted, it will not turn and there will be no idle speed. You can adjust the idle speed screw and the mixed gas screw to see if that solves the problem.