Specifications:

Maximum Output Power: 1000W

Input Voltage: 110V 60Hz

Cut Width: 2-14mm/0.08-0.551inch

Cut Depth: 9-14mm/0.35-0.551inch

Package Included:

Tire Regroover x 1

Fuse x 2

U-Type 2,4,6,8,10 mm Blades x 2

V-Type 2,4,6,8,10 mm Blades x 2

English User Manual x 1

Power Cord x 1

Notes:

1.Please wait for the blade holder to cool down before replacing the blade.

2.Please clean the steel wires and stones on the tire before use to avoid burning the blade.

3.When using the blade, do not dry burn. Do not let the blade burn red when using.

4.The engraving depth and the depth of the ex-posed part of the fixed blade must be the same.

5.When installing the blade, the contact points of the copper heads of the two clamping blades must not be connected.

6.Please don't work continuously for a long time to avoid the machine being too hot. Push the handle speed to be gentle, and force to be even.

7.Please turn the voltage higher if feeling the pushing hard and turn the voltage lower if the ruhher tire fumes when grooving.